Construction
Rough handling, rebar ties, concrete finishing, tool vibration and outdoor wet grip.
Coated cut gloves · impact options · abrasion review
OSHA 1910 hazard assessmentANSI/ISEA 105EN 388EN ISO 374NFPA 70E task review
Rough handling, rebar ties, concrete finishing, tool vibration and outdoor wet grip.
Coated cut gloves · impact options · abrasion review
Stamped edges, hot surfaces, sparks, assembly dexterity and oil-contaminated parts.
EN 388 · EN 407 · dexterity fit trials
Hydrocarbon exposure, muds, solvents, abrasive handling and confined maintenance tasks.
EN ISO 374 · cuff length · grip surface
Arc flash boundaries, lockout work, rubber glove inspection and leather protector control.
NFPA 70E · ASTM rubber class · LOTO sequence
Field repairs, roadside exposure, fuel handling, vehicle inspection and response kit stocking.
Nitrile disposable · cut A5 · high visibility
Powder-free disposable gloves, contamination control, allergen review and clean handling.
AQL · accelerator-free · cleanroom packaging| Workplace | Primary Hazards | References | Recommended PPE Bundle |
|---|---|---|---|
| Metal fabrication | Sheet edge cuts, burrs, oil, intermittent heat | ANSI/ISEA 105 A4-A7, EN 388 cut D-F | Cut resistant knit glove with nitrile coating and heat note |
| Chemical blending | Splash, permeation, wet handling, cuff exposure | EN ISO 374, SDS chemical family review | Chemical resistant gauntlet plus splash eye protection |
| Clean assembly | Contamination, static sensitivity, barrier expectation | AQL language, ESD handling, cleanroom packaging review | Powder-free nitrile disposable or ESD glove family |
| Electrical maintenance | Shock, arc flash, lockout sequencing, inspection records | NFPA 70E, OSHA 1910.147, ASTM rubber glove class | Insulating glove system, leather protector, LOTO kit |
Reduced glove trial confusion by separating assembly, deburr and chemical wipe tasks into three documented glove groups with supervisor signoff.
Built a chemical glove review table based on named solvent families, use duration and EN ISO 374 references before production rollout.
Compared powder-free nitrile options for clean handling, wearer comfort and packaging expectations without using unsupported sterile claims.
A cut-resistant glove for steel handling, a chemical gauntlet for cleaning and a disposable nitrile glove for hygiene control may all sit under Hand & Arm Protection, but the technical review is different. The workplace matrix keeps standards tied to the task instead of turning them into generic badges.
Used for cut, abrasion, puncture and needlestick discussions across industrial hand protection.
Explains European mechanical glove markings and cut performance letters for global plants.
Supports chemical glove conversations by named chemical families and permeation evidence.
Send a task description, hazard source, current glove and standard requirement. The review can turn a broad product category into a defensible workplace bundle.